Floating pneumatic yokohama fenders

As a manufacturer Nanhai Airbag can also design and produce any specific floating pneumatic fenders and ship launching airbag requirement you wish.

Nanhai Airbag has a large product range of standard pneumatic rubber fenders available on stock. Custom-made rubber fenders can also be provided according to customer's requirement.




CTN Type
Pneumatic Fenders are usually supplied with a protective Chain & Tyre Net (CTN) fitted around the body giving extra protection to the body of the fender. The CTN is assembled out of galvanised chains and shackles covered at the joints with used truck tyres (or aircraft tyres on request) and along the length of the chain with rubber tubes. Anti-scratch matting can also be supplied inside the tyre centers for added protection if specified. On smaller diameter fenders a chain net or rope net can also be installed.




Our Flange





评论

发表评论

此博客中的热门博文

Floating yokohama pneumatic fenders from NANHAI AIRBAG cope with ISO 17357

图片
Nanhai Airbag has a large product range of standard pneumatic rubber fenders available on stock. Custom-made rubber fenders can also be provided according to customer's requirement. NANHAI AIRBAG’ pneumatic floating fenders are exported to many countries like Germany, Norway, Argentina, Vietnam, Brazil, America, Denmark, Finland, Indonesia, Singapore, Philippines, Belgium, Chile, Colombia, Croatia and more. High product quality and reasonable costing drives their adoption in the global market and are increasingly preferred as the No.1 alternative?to the Yokohama brand. These Fenders are generally equipped with chain nets and tyres or with wire rope nets, end rings, Towing Rings and Swivel Joints with suitable D-Shackles at both ends for better life. Sling type Fenders are also available on specific request. These Fenders offer excellent resistance to shear force, inclined compression and are highly reliable. Pneumatic Rubber Yokohama Fenders have been widely used fo
阅读全文

Yokohama fenders type - Marine rubber fendering

图片
Almost floating pneumatic rubber fenders are protected by a chain and tyre net. The purpose of the chain and tyre net is to protec the fender body from damage by sharp objets or protrusions such as rough faced quay walls, to distribute sheer forces along the length of the chain net and to prevent the fender body from having to absorb them. Features of Floating Pneumatic Rubber Fender: (1) Marine rubber fender is with the use of high quality natural rubber nylon cord fabrics. (2) Good ageing resistance performance character is tics. (3) Using compressed air as damping medium, the rubber can transform flexibly under pressure, with large contact area, small reaction and absorb large amount of energy. (4) When berthing, the ship is almost at a certain angle, the marine rubber fender can realize contact in a certain angle by bringing full play to its performance. (5) Floating on the water surface, even the ship fluctuate and sway resulting from ebb and flow and waves, the pneumati
阅读全文

Ship Launching Balloon / Ship Launching Airbags

图片
NANHAI AIRBAG Specialize in Manufacturing Ship Launching Airbag, Marine Airbag, Inflatable Marine Airbag, Air-lift Ship Airbag, Marine Airbag for Ship Launching and Pulling, etc. Ship Launching Airbags, also known as roller bags or ship launching balloon, are made of heavy-duty synthetic-tire-cord layers with inner and out rubber layers. Rubber Ship Launching Balloons Application   Marine airbags are widely used for ship launching, heavy transportation and marine salvage nowadays. Marine airbags are often called ship launching airbags that indicate the most popular application of these heavy duty airbags is for ship launching. It is estimated that more than 80 percent new built ships who’s DWT below 60,000 are launched by marine airbags. Major Strengths of Rubber Ship Launching Balloons 1 High safety level: equipped with a reliable safety valve, our airbags can stand the maximum pressure up to 4 times that of the operating pressure. 2 Good air tightness:  pressure
阅读全文